Mr. Freeze MIM-18 - User Manual

Questions and Answers

J
John JenkinsAug 16, 2025
What to do if the 'Add Water' light is on in my Mr. Freeze Ice Maker?
- B
  Brian ColeAug 16, 2025
  If the "Add Water" indicator light is on, it means the water level is low. Press the OFF button, fill the Mr. Freeze Ice Maker with water, wait three minutes, and then press ON to restart it. The ice maker will restart automatically when the water reaches the fill line. Alternatively, if the pump is full of air, unplug the silicon stopper and let several drops of water run out.
A
Ashley WeberAug 19, 2025
Why is the 'Ice Full' indicator on my Mr. Freeze Ice Maker?
- M
  Michael MccoyAug 19, 2025
  The “Ice Full” indicator light turns on when the ice basket is full. To resolve this, remove the ice from the ice basket of your Mr. Freeze Ice Maker.
T
taylorangelaAug 22, 2025
What to do if both 'Add Water' and 'Ice Full' lights are on in my Mr. Freeze MIM-18?
- P
  peggygonzalezAug 22, 2025
  If both the “Add Water” and “Ice Full” indicators light up, it means the water tray or ice case panel are blocked by ice cubes. Clear the ice cubes under the ice case panel. Then, pull out the power plug from the wall outlet and plug it back in. Press the “ON/OFF” button and allow a few minutes for your Mr. Freeze Ice Maker to restart automatically.
M
Megan MillerAug 25, 2025
Why is my Mr. Freeze MIM-18 Ice Maker leaking water?
- C
  Cody StewartAug 26, 2025
  If your Mr. Freeze Ice Maker is leaking water, the drain stopper may not be inserted properly. Check the drain stopper to ensure it is correctly placed.
A
Alex WolfeAug 27, 2025
Why is my Mr. Freeze Ice Maker running but not making ice?
- L
  Lisa DixonAug 27, 2025
  If the ice making cycle of your Mr. Freeze Ice Maker is normal but no ice is being made, it could be due to high ambient or water temperature. Ensure you operate the ice maker below the recommended temperature and use cold water. If that doesn't solve the problem, consult a qualified technician.
K
Kimberly BrownAug 30, 2025
Why is my Mr. Freeze MIM-18 Ice Maker compressor buzzing?
- A
  Amber MccoyAug 30, 2025
  If the compressor of your Mr. Freeze Ice Maker is working abnormally and making a buzzing noise, it's likely due to voltage being lower than recommended. Stop the ice maker and do not restart it until the voltage is normal.
R
Randall WeberSep 1, 2025
Why are the ice cubes from my Mr. Freeze Ice Maker melting?
- H
  Hailey ChapmanSep 2, 2025
  If the ice cubes from your Mr. Freeze Ice Maker are melting, it may be due to temperature fluctuations. Ensure the appliance is placed in a temperature-regulated area and avoid leaving the lid open. Transfer ready-made ice to another container and store it in a cooler or freezer to avoid recycling.
D
Debra MartinezSep 4, 2025
How to fix indicator lights on but display not on Mr. Freeze Ice Maker?
- M
  Mathew NewtonSep 4, 2025
  If the indicator lights on your Mr. Freeze Ice Maker are on but the display is not, it could be due to a blown fuse or lack of power. Replace the fuse or turn the power on.
J
john75Sep 7, 2025
Why is the 'ice full' indicator on when there are not enough ice cubes in my Mr. Freeze Ice Maker?
- M
  Matthew CoxSep 7, 2025
  If there are not enough ice cubes in the ice basket, but the “ice full” indicator is on, the room temperature may be too low. Ensure the unit is in an area where the temperature is above 65°F. Additionally, the ice cubes being formed may be touching the sensor. Remove the ice cubes and wait a few minutes to let the unit restart.
S
Shane KeySep 10, 2025
What to do if Mr. Freeze MIM-18 Ice Maker keeps running but the water is warm?
- L
  Leah DavisSep 10, 2025
  If your Mr. Freeze Ice Maker keeps running but the water is warmer than the normal temperature, the magnetic valve may be broken. Replace the magnetic valve.