Mr. Freeze MIM-5802 - User Manual

Questions and Answers

C
cleeJul 26, 2025
What to do if the ADD WATER light is on in my Mr. Freeze MIM-5802?
- N
  Nathan MorrisJul 26, 2025
  If the ADD WATER light is illuminated on your Mr. Freeze Ice Maker, it could be due to two reasons. First, there may be no water in the unit. To resolve this, press the “STOP” button, fill the ice maker with water, wait three minutes, and then press the “START” button to restart. Second, the water filter might be clogged with residue. In this case, remove the water filter and rinse it with water to clean off any buildup.
M
Monique ThomasJul 31, 2025
How to fix the indicator light if it is not on in my Mr. Freeze MIM-5802 Ice Maker?
- S
  Sarah SmithJul 31, 2025
  If the indicator light on your Mr. Freeze Ice Maker display is not on, it could be due to a broken fuse or a lack of power. Try replacing the fuse. Also, check the power cord and socket to ensure they are functioning correctly.
D
Daniel HillAug 5, 2025
What does it mean when the ICE FULL and ADD WATER lights are on at the same time on my Mr. Freeze Ice Maker?
- A
  Alexander GrayAug 6, 2025
  If the ICE FULL and ADD WATER lights illuminate simultaneously on your Mr. Freeze Ice Maker, it indicates that the water tray is likely blocked by an ice cube. Clear the ice cube under the ice shovel, then press the ”START” button and wait two minutes for the machine to restart automatically.
J
Jason DavisAug 10, 2025
Why is the ice from my Mr. Freeze MIM-5802 Ice Maker not clear?
- P
  Pamela TurnerAug 10, 2025
  If the ice produced by your Mr. Freeze Ice Maker appears white instead of clear, it's likely due to an insufficient amount of water in the water tank. Try adding more water to resolve this issue.
K
Kimberly WaltonAug 15, 2025
Why does my Mr. Freeze MIM-5802 compressor make a buzzing noise?
- C
  Christina NicholsAug 16, 2025
  If the compressor of your Mr. Freeze Ice Maker is making a buzzing noise, it's likely that the voltage is lower than recommended. Stop the ice maker and do not restart it until the voltage is normal.
A
Alicia SparksAug 20, 2025
What to do if my Mr. Freeze Ice Maker produces one large block of ice?
- E
  edurhamAug 20, 2025
  If your Mr. Freeze Ice Maker is producing ice that is too large, forming into one large block on the evaporator module, it could be because the water temperature in the reservoir is too low, or the ambient temperature is below 77° F. To fix this, stop the machine and reset the ice size to small, then restart the machine. If the problem continues, consider relocating the machine to a warmer location.

Summary

Important Safeguards

General Safety Precautions

Follow basic safety precautions to reduce risk of fire, electric shock, and injury.

Installation and Location

Operation and Maintenance Safety

Operating Instructions

Ice Making Process

Filling water, selecting size, starting, and stopping the ice production.

Indicator Lights and Water Level

Understanding ICE FULL, ADD WATER lights and maintaining water level.

Care and Maintenance

Cleaning Procedures

Detailed steps for cleaning the interior, exterior, and components.

Water Reservoir Maintenance

Water Filter Cleaning

Troubleshooting

Compressor Noise and ADD WATER Light

Diagnosing buzzing compressor and ADD WATER indicator issues.

Indicator Lights and Ice Formation

Resolving issues with display lights, large ice blocks, or no ice production.

Ice Quality and Clarity Problems

Limited Warranty and Returns

One Year Limited Warranty

Details of the warranty period, coverage, and exclusions.

Return Instructions

Mr. Freeze MIM-5802 Specifications

General

Model	MIM-5802
Type	Portable Ice Maker
Production Capacity	58 lbs per day
Water Supply	Manual Fill
Ice Cube Size	Small, Medium, Large
Voltage	115V
Water Tank Capacity	2.2 Liters
Noise Level	45 dB
Ice Shape	Bullet