Need help?Do you have a question about the mr. steam MS-90E and is the answer not in the manual?
General| Model | MS-90E |
|---|---|
| Category | Inverter |
| kW Rating | 9.0 kW |
| Power Output | 9.0 kW |
| Amperage | 37.5 A |
| Frequency | 60 Hz |
| Voltage | 208-240 V |
| Input Voltage | 208-240 V |
Covers all safety instructions, warnings, and precautions for using the steambath generator, including overheating and slipping risks.
Procedure for determining required room volume for steam generator sizing.
Technical specifications including kW, amps, volume, and dimensions for different models.
Details on walls, doors, flooring, ceiling, and drains for a safe steam room.
Advice on generator location, clearance, and necessary connections.
Visual guide for typical generator and control setup.
Instructions for connecting multiple Super series generators.
Instructions for connecting water supply and drain lines.
Guidelines for steam line, safety valve, and condensate management.
Recommendations for drain pan and AromaSteam system installation.
Step-by-step guide for attaching the steam head to the steam pipe.
Table of dimensions for generator components and connection sizes.
Details on voltage, wire size, grounding, and circuit breaker requirements.
Specific wiring schematics for standard MS models.
Specific wiring schematics for Super series MS models.
Wiring schematics for the multi-generator Super 4E, 5E, and 6E models.
Steps for powering up, testing, and initial operation of the generator.
Interpretation of error codes for troubleshooting generator issues.
Instructions for connecting multiple steam generators in tandem.
Plumbing and connection steps for the automatic drain system.
How to check and operate the Autoflush system for proper function.
Guidelines for drain pan placement and plumbing to prevent leaks.
Description of the factory-installed feature for faster steam generation.
Diagram showing components for standard MS generator models.
Diagram showing components for MS Super series generator models.
List of replacement parts for generators, contactors, and transformers.
List of replacement parts for heating elements and various cables.
Important safety and installation precautions for eTempo controls.
Determining the optimal location for installing the eTempo control.
Procedure for connecting the MSTS remote temperature probe.
Steps for physically mounting the control and ensuring a moisture seal.
Securing the probe cable and ensuring a proper moisture seal.
Steps for connecting and placing the Steam Genie interface module.
Checking status lights and verifying proper connection of the Genie module.
Steps to pair the Steam Genie remote with the interface module.
Common issues and solutions for operating the Steam Genie.
Cleaning and maintenance advice for eTempo controls and steamheads.
Important safety information and routine maintenance for the generator.
Controlling steam flow and pausing the steambath session.
Using timer, memory functions, and adjusting temperature settings.
Switching temperature display between Fahrenheit and Celsius.
Initial unit power-up and setting the clock time.
Adjusting session time and viewing the current clock time.
Adjusting temperature settings and display units (°F/°C).
Utilizing custom programs and features like AromaSteam and ChromaSteam.
Guidelines for safely using essential oils with the AromaSteam system.
Steps to replace the battery in the Steam Genie remote control.
How to operate the Steam Genie remote to control the steam generator.
Understanding the indicator lights on the Genie Interface Module.
To Next Page
