1 - All you need to know before Installation
Mr12volt interface emulates CD changer function of a Audi MMI radio and
is connected through MOST bus of its function. Once successfully
installed, Mr12volt will appear in Media menu as a CD changer. ( Picture
illustrated above)
No coding is needed regardless of the MMI software version. And it works
with or without a CD changer,
If there is a CD changer fitted, particularly in A6 C6 2009-2010, it must be
disabled and connector of CD changer will connect into Mr12volt instead
Compatible with MMI 3G Basic, 3G High , 3G Plus
DIP SWITCH CONFIGURATION
To Next Page
Loading...
