Need help?Do you have a question about the MrCool A-09-HP-C-230A and is the answer not in the manual?
General| Model Number | A-09-HP-C-230A |
|---|---|
| Category | Heat Pump |
| Cooling Capacity (BTU/h) | 9000 |
| Heating Capacity (BTU/h) | 9000 |
| Refrigerant | R410A |
| Phase | 1 |
| Operating Temperature Range (Cooling) | 5°F to 122°F |
| Indoor Unit Dimensions (H x W x D) | 8.3 |
Important warnings and precautions before starting the installation process.
Guidelines for safe electrical wiring and connections to prevent shock or fire.
Essential checks and considerations before starting the indoor unit installation.
Criteria and standards for choosing an appropriate indoor unit placement.
Detailed steps for attaching the indoor unit's mounting plate to the wall.
Procedure for drilling the wall hole for piping and cables, with angle considerations.
Steps for preparing refrigerant pipes, including cutting and bending for exit.
Instructions for connecting the drain hose and ensuring proper drainage.
Mandatory regulations and safety precautions for all electrical wiring work.
Procedure for connecting the signal cable to the indoor unit's terminal block.
Final steps to securely attach the indoor unit to the wall mounting plate.
Criteria for choosing an appropriate location for the outdoor unit, including clearances.
Procedure for installing the drain joint for condensate drainage, with cold climate notes.
Instructions for anchoring the outdoor unit to the ground or a platform.
To Next Page
