MrCool Versa Pro MVP-18-HP-C-230-25 User Manual

Versa Pro
Central Ducted
18K-30K
Installation &
Owner’s Manual
MODELS:
Read this manual carefully before installation and keep it where
the operator can easily nd it for future reference.
Due to updates and constantly improving performance, the
information and instructions within this manual are subject to
change without notice.
Version Date: 04/30/2024
Please visit www.mrcool.com/documentation
to ensure you have the latest version of this manual.
CONDENSER:
MVP-18-HP-C-230-25
MVP-24-HP-C-230-25
MVP-30-HP-C-230-25
AIR HANDLER:
MVP-18-HP-MUAH-230-25
MVP-24-HP-MUAH-230-25
MVP-30-HP-MUAH-230-25
COMPLETE SYSTEM:
MVP-18-HP-230-25
MVP-24-HP-230-25
MVP-30-HP-230-25

MrCool Versa Pro MVP-18-HP-C-230-25 Specifications

General

Model Number	MVP-18-HP-C-230-25
Category	Air Handlers
Voltage	230V
Refrigerant	R-410A
SEER Rating	20
HSPF Rating	10
Outdoor Unit Noise Level	56 dB
Operating Temperature (Cooling)	5°F to 122°F
Indoor Unit Noise Level	42 dB
Dimensions (Outdoor Unit)	31.5 x 12.6 x 21.7 inches
Cooling Capacity	18000 BTU/h

Summary

Safety Information

Safety Precautions

Read before use; incorrect usage may cause serious damage or injury.

Installation & Use Warnings

Warnings for installation, product use, and electrical work.

Installation Procedures

Indoor Unit Installation

Safety, preparation, dimensions, mounting, airflow, ductwork, and connections.

Refrigerant Piping Connection

Warnings, pipe length/elevation, and connecting quick-connect refrigerant lines.

Outdoor Unit Installation

Location selection, drain fitting, anchoring, and connecting refrigerant lines.

Electrical Connections and Configuration

Wiring Precautions and Overview

Critical warnings, precautions, and wiring overview before electrical work.

Unit Wiring

Detailed steps for outdoor and indoor unit wiring, including DIYPRO cable.

DIP Switch Settings and Control Logic

Explanation of DIP switch functions and configuration for thermostat and other controls.

System Operation and Specifications

Key Specifications

Electrical and line gauge specifications for cooling and heating.

Air Evacuation and Refrigerant

Steps for evacuating the system and adding refrigerant.

Test Run Procedures

Points to confirm and instructions for performing the system test run.