Need help?Do you have a question about the MRV Communications OptiSwitch-100 and is the answer not in the manual?
Details on FCC and CE compliance, including relevant standards.
Overview of the OptiSwitch-100/F as a robust switch platform.
Summary of features and management capabilities via MRV MegaVision and CLI.
Detailed technical specifications including compatibility, power, and dimensions.
Guidelines for installing the OptiSwitch-100/F, including panel descriptions.
Instructions for connecting power supply and Ethernet devices.
Steps for connecting to the management port and logging into the CLI.
Explanation of CLI structure, command entry, and help features.
Commands for configuring console settings like prompt, password, and screen.
Commands for setting and verifying IP addresses, netmask, and gateway.
Managing ARP table entries and viewing ARP statistics.
Configuring port speed, mode, state, flow control, and priority.
Managing VLANs, ISVLANS, Server Ports, and Virtual Broadcast Domains.
Intrusion control features based on port and MAC address.
Ensuring loop-free topology using STP, including bridge and port parameters.
Configuring Etherchannel for bandwidth aggregation and redundancy.
Using SNMP for network management and configuring SNMP traps.
Network testing tools including Ping, Port Mirroring, and Frame Generator.
Displaying port statistics, RMON, and management counters.
Steps to diagnose and resolve operating problems with the unit.
Quick reference for console commands and their categories.
Lists default values for various system configurations.
Instructions for updating firmware using TFTP.
Details on FCC and CE compliance, including relevant standards.
Overview of the OptiSwitch-100/F as a robust switch platform.
Summary of features and management capabilities via MRV MegaVision and CLI.
Detailed technical specifications including compatibility, power, and dimensions.
Guidelines for installing the OptiSwitch-100/F, including panel descriptions.
Instructions for connecting power supply and Ethernet devices.
Steps for connecting to the management port and logging into the CLI.
Explanation of CLI structure, command entry, and help features.
Commands for configuring console settings like prompt, password, and screen.
Commands for setting and verifying IP addresses, netmask, and gateway.
Managing ARP table entries and viewing ARP statistics.
Configuring port speed, mode, state, flow control, and priority.
Managing VLANs, ISVLANS, Server Ports, and Virtual Broadcast Domains.
Intrusion control features based on port and MAC address.
Ensuring loop-free topology using STP, including bridge and port parameters.
Configuring Etherchannel for bandwidth aggregation and redundancy.
Using SNMP for network management and configuring SNMP traps.
Network testing tools including Ping, Port Mirroring, and Frame Generator.
Displaying port statistics, RMON, and management counters.
Steps to diagnose and resolve operating problems with the unit.
Quick reference for console commands and their categories.
Lists default values for various system configurations.
Instructions for updating firmware using TFTP.
General| Power Supply | 100-240VAC, 50-60Hz |
|---|---|
| Jumbo Frame Support | 9K bytes |
| Management | Web, CLI, SNMP |
| Operating Temperature | 0°C to 40°C |
| Weight | 3.5 kg |
To Next Page