This Receiver Kit is compatible with all Evolution
TIC Transmitters. For best video performance with
the Evolution 5000 series transmitter, connect the
included video adapter/attenuator to the Evolution
5000 video-out jack; then, connect the Evolution
5000 series transmitter to the adapter.
The channel settings on this receiver have been
set to correspond with the Evolution 5000 external
transmitter. If using another MSA TIC with an
internal transmitter (i.e., Evolution 4000 or 3000), it
may be necessary to reverse the channel settings
(e.g., transmit on channel 1 while receiving on
channel 2) in order to ensure full compatibility.
This manual addresses the features, benefits,
specifications, and operational instructions for both
receiver kits. Additional information/instructions for
the optional telemetry system can be found in the
following documentation:
• Evolution 3000 TIC Operation and Instruction
Manual (P/N 10023654)
• Evolution 4000 TIC Operation and Instruction
Manual (P/N 10015940)
• Evolution 5000 Transmitter Instruction Manual
(P/N 10048454).
APPLICATIONS
The Remote Wireless Receiver System is to be
used in conjunction with the wireless transmitters
available for the Evolution 3000, Evolution 4000,
or Evolution 5000 Thermal Imaging Cameras
(TICs) to remotely display the images generated
by the Evolution TIC. Many applications exist for a
remote transmission and reception system,
including training, scene monitoring, and
event recording.
FEATURES
• Two user-selectable channels
(2458 MHz and 2474 MHz)
• Dual voltage input (110 VAC or 12 VDC)
• Omni-directional Antenna
• Video output connector
• Compatibility with all Evolution
TIC transmitters.
2
To Next Page
Loading...
