MSI 870S-G54 Series - Page 42

En-32
MS-7599 Manboard
CPU Technology Support
Press <Enter> to enter the sub-menu. Ths sub-menu shows the technologes that
the nstalled CPU supported.
CPU Feature
Press <Enter> to enter the sub-menu.
AMD Cool’n’Quet
The Cool’n’Quet technology can e󰘯ectvely and dynamcally lower CPU speed and
power consumpton.
Important
To ensure that Cool’n’Quet functon s actvated and wll be workng properly, t s re-
qured to double con󰘰rm that:
Run BIOS Setup, and select Cell Menu. Under Cell Menu, 󰘰nd AMD Cool’n’Quet,
and set ths tem to “Enabled”.
Enter Wndows, and select [Start]->[Settngs]->[Control Panel]->[Power Optons].
Enter Power Optons Propertes tag, and select Mnmal Power Management under
Power schemes.
C1E Support
To enable ths tem to read the CPU power consumpton whle dle. Not all proces
-
sors support Enhanced Halt state (C1E).
SVM Support
Ths tem s used to enable/ dsable SVM.
AMD Cool’n’Quet
The Cool’n’Quet technology can e󰘯ectvely and dynamcally lower CPU speed and
power consumpton.
C1E Support
To enable ths tem to read the CPU power consumpton whle dle. Not all processors
support Enhanced Halt state (C1E).
Adjust CPU FSB Frequency (MHz)
Ths tem allows you to select the CPU Front Sde Bus clock frequency (n MHz).
OC Steppng
Ths tem wll be enabled after you set the overclockng frequency n the “Adjust CPU
FSB Frequency (MHz)”. And the followng tems wll appear. Ths tems wll help the
system to overclock step by step after system bootng up.
Start OC Steppng From (MHz)
Ths tem s used to set the ntal FSB clock. The system wll boot wth the ntal FSB
clock, and start to overclock from ntal FSB clock to set FSB clock that you set n
“Adjust CPU FSB Frequency (MHz)” step by step.
OC Step
Ths tem s used to set how many steps for FSB colck overclockng.
OC Step Count Tmer
Ths tem s used to set the bu󰘯er tme for every step.
▶
▶
▶
•
•
▶
▶
▶
▶
▶
▶
▶
▶
▶