MSI 870S-G54 Series - Page 43

En-33
Englsh
Adjust CPU Rato
Ths tem s used to adjust CPU clock multpler (rato). It s avalable only when the
processor supports ths functon.
Adjusted CPU Frequency (MHz)
It shows the adjusted CPU frequency. Read-only.
Adjust CPU-NB Rato
Ths tem s used to adjust CPU-NB rato.
Adjusted CPU-NB Frequency (MHz)
It shows the adjusted CPU-NB frequency. Read-only.
Unlock CPU Core
Ths tem s used to unlock the CPU core. Please refer to the procedures below for CPU
core unlocked n BIOS setup.
Important
Ths CPU core unlocked behavor depends on the CPU ablty/ characterstc, and t
s not guaranteed.
Depend on CPU’s characterstc, once you get nstable scenaro, please restore the
default settngs for system.
You can also check the core numbers n performance tab of Wndows task man
-
ager.
Success
Enter “Cell Menu” and set “Unlock CPU Core” to [Enabled].
Save changes and ext the BIOS setup.
System restart.
You wll see the “X4” (quad core) or “X2” (dual core for
Sempron seres only) durng POST.
Fal
Set “Adjust CPU-NB Rato” and
“HT Lnk Speed” to [x8].
AMD Phenom(tm) II X4 Processor
Clear CMOS data.
The CPU does not support CPU core
unlock, please leave the default settngs
for system.
AMD Sempron(tm) II X2 Processor
CPU Core Control
Ths tem allows you to select the number of actve processor cores.
OC Gene Lte
Settng ths tem to [Enabled] allows the system to detect the maxmum FSB clock and
to overclock automatcally. If overclockng fals to run, you can try the lower FSB clock
for overclockng successfully.
▶
▶
▶
▶
▶
•
•
•
▶
▶