MSI 890GXM-G65 series - Page 61

BIOS Setup ▍
MS-7642
3-21
BIOS Setup ▍
MS-7642
Important
To ensure that Cool’n’Quet functon s actvated and
wll be workng properly, t s requred to double con
-
󰘰rm that:
Run BIOS Setup, and select Cell Menu. Under Cell
Menu, 󰘰nd AMD Cool’n’Quet, and set ths tem to
“Enabled”.
Enter Wndows, and select [Start]->[Settngs]-
>[Control Panel]->[Power Optons]. Enter
Power
Optons Propertes tag, and select Mnmal Power
Management under Power schemes.
C1E Support
To enable ths tem to read the CPU power consumpton whle dle. Not all proces
-
sors support Enhanced Halt state (C1E).
SVM Support
Ths tem s used to enable/ dsable SVM.
Adjust CPU FSB Frequency (MHz)
Ths tem allows you to select the CPU Front Sde Bus clock frequency (n MHz).
OC Steppng
Ths tem wll be enabled after you set the overclockng frequency n the “Adjust CPU
FSB Frequency (MHz)”. And the followng tems wll appear. Ths tems wll help the
system to overclock step by step after system bootng up.
Start OC Steppng From (MHz)
Ths tem s used to set the ntal FSB clock. The system wll boot wth the ntal base
clock, and start to overclock from ntal FSB clock to set FSB clock that you set n
“Adjust CPU FSB Frequency (MHz)” step by step.
OC Step
Ths tem s used to set how many steps for FSB colck overclockng.
OC Step Count Tmer
Ths tem s used to set the bu󰘯er tme for every step.
Adjust CPU Rato
Ths tem s used to adjust CPU clock multpler (rato). It s avalable only when the
processor supports ths functon.
Adjusted CPU Frequency (MHz)
It shows the adjusted CPU frequency. Read-only.
Adjust CPU-NB Rato
Ths tem s used to adjust CPU-NB rato.
Adjusted CPU-NB Frequency (MHz)
It shows the adjusted CPU NB frequency. Read-only.
•
•
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶