Appendix B
B-12
AMD RAID
17. When prompt “Successful To Create Logical Drive” press Enter to continue.
Successful To Create Logical Drive
‘Enter’ Key - Continue
18. Exit RAID ROM by pressing F10. When prompt “Are you Sure To Exit” press Y.
Are You Sure To Exit? ( y / n )
19. After exiting RAID ROM, system will prompt you to restart computer (shown as
below). Insert Windows 7/ 8 64bit DVD into the DVD drive. Press Enter to reboot.
Drv[40] Ctrl[B2] Lang[eng] - Options Set.
Press [ENTER] to restart platform
20. Press F11 while system booting to access boot device selecting menu.
21. Select DVD drive that contain Windows 7/ 8 64bit DVD. System will start the
Windows 7/ 8 64bit installation by booting from the Windows 7/ 8 64bit DVD.
into a USB 2.0 port (not USB 3.0 port) and click Browse.
Important
\\ChipSet\RICHLAND_W7_W8\Packages\Drivers\SBDrv\hseries\RAID
To Next Page
Loading...
