MSI 990FXA

3-10
BIOS Setup
MS-7640
Chapter 3
BIOS Setup
MS-7640
Chapter 3
Wake Up Event Setup
Press <Enter> to enter the sub-menu.
Wake Up Event By
Settng to [BIOS] actvates the followng 󰘰elds, and use the followng 󰘰elds to set the
wake up events. Settng to [OS], the wake up events wll be de󰘰ned by OS.
Resume By RTC Alarm
The 󰘰eld s used to enable or dsable the feature of bootng up the system on a
scheduled tme/date.
Date/ HH:MM:SS
If Resume By RTC Alarm s set to [Enabled], the system wll automatcally resume
(boot up) on a spec󰘰c date/hour/mnute/second spec󰘰ed n these 󰘰elds (usng the
<+> and <-> to select the date & tme settngs).
Resume By PCI or PCI-E Devce
When set to [Enabled], the feature allows your system to be awakened from the
power savng modes through any event on PCI or PCIE devce.
Resume From S3 by USB Devce
The tem allows the actvty of the USB devce to wake up the system from S3 (Sus
-
pend to RAM) sleep state.
Resume From S3 by PS/2 Mouse/ Keyboard
These tems determne whether the system wll be awakened from S3 state when
nput sgnal of the PS/2 mouse/ keyboard s detected.
▶
▶
▶
▶
▶
▶
▶