MSI 990FXA

3-16
BIOS Setup
MS-7640
Chapter 3
BIOS Setup
MS-7640
Chapter 3
Securty
Admnstrator Password
Ths tem s used to set the admnstrator password. When a admnstrator password
has been set, you wll be prompted to enter t every tme you try to enter BIOS Setup.
User Password
Ths tem s used to set the user password. When a user password has been set, you
wll be prompted to enter t every tme you try to enter the operatng system.
Important
When you select the Admnstrator Password / User Password tem, a password box wll
appear on the screen. Type the password, and press <Enter>. The password typed now
wll replace any prevously set password from CMOS memory. You wll be prompted to
con󰘰rm the password. Retype the password and press <Enter>. You may also press
<Esc> to abort the selecton and not enter a password.
To clear a set password, just press <Enter> when you are prompted to enter the
password. A message wll show up con󰘰rmng the password wll be dsabled. Once
the password s dsabled, the system wll boot and you can enter Setup/ OS wthout
enterng any password.
These two tems prevent an unauthorzed person from changng any part of your system
con󰘰guraton.
U-Key
Ths tem s used to enable/ dsable USB drve as a key.
▶
▶
▶