Back Panel
Mouse/ Keyboard
The standard PS/2
®
mouse/keyboard DIN connector s for a PS/2
®
mouse/keyboard.
Clear CMOS Button
There s a CMOS RAM on board that has a power supply from external battery to keep
the system conguraton data. Wth the CMOS RAM, the system can automatcally
boot OS every tme t s turned on. If you want to clear the system conguraton, use
the button to clear data. Press the button to clear the data.
Important
Make sure that you power o the system before clearng CMOS data.
After pressng ths button to clear CMOS data n power o (G3) state, the system wll
boot automatcally.
Coaxal S/PDIF-Out
Ths SPDIF (Sony & Phlps Dgtal Interconnect Format) connector s provded for dgtal
audo transmsson to external speakers through a coaxal cable.
Optcal S/PDIF-Out
Ths SPDIF (Sony & Phlps Dgtal Interconnect Format) connector s provded for dgtal
audo transmsson to external speakers through an optcal ber cable.
USB 2.0 Port
The USB (Unversal Seral Bus) port s for attachng USB devces such as keyboard,
mouse, or other USB-compatble devces. Supports data transfer rate up to 480Mbt/s
(H-Speed).
▶
▶
•
•
▶
▶
▶
Lne-In
Lne-Out
Mc
RS-Out
CS-Out
SS-Out
Mouse/
Keyboard
Clear
CMOS
Button
USB 2.0 Port
USB 3.0 Port
Coaxal
S/PDIF-Out
Optcal
S/PDIF-Out
LAN
s a CMOS RAM on board that has a power supply from external battery to keep
www.devicemanuals.eu
s a CMOS RAM on board that has a power supply from external battery to keep
th the CMOS RAM, the system can automat
www.devicemanuals.eu
th the CMOS RAM, the system can automat
s turned on. If you want to clear the system congurat
www.devicemanuals.eu
s turned on. If you want to clear the system congurat
the button to clear data. Press the button to clear the data.
www.devicemanuals.eu
the button to clear data. Press the button to clear the data.
Make sure that you power o the system before clear
www.devicemanuals.eu
Make sure that you power o the system before clear