MSI A55M-P35 series

BIOS Setup
MS-7697
Chapter 3
2-13
BIOS Setup
MS-7697
Chapter 3
tRTP
Ths tem s used to adjust the tme nterval between a read and a precharge com-
mand.
tWR
Mnmum tme nterval between end of wrte data burst and the start of a precharge
command. Allows sense ampl󰘰ers to restore data to cells.
tRRD
Spec󰘰es the actve-to-actve delay of d󰘯erent banks.
tWTR
Mnmum tme nterval between the end of wrte data burst and the start of a column-
read command. It allows I/O gatng to overdrve sense ampl󰘰ers before read
command starts.
tRFC0/ 1
These settngs determne the tme RFC0/1 takes to read from and wrte to a memory
cell.
Advanced Channel 1/ 2 Tmng Con󰘰guraton
Press <Enter> to enter the sub-menu. And you can set the advanced memory tmng
for each channel.
tRWTT0/ tWRRD/ tWRWR/ tRDRD
These tems s used to set the memory tmngs for memory channel 1/ 2.
Bank Interleavng
Bank Interleavng s an mportant parameter for mprovng overclockng capablty of
memory. It allows system to access multple banks smultaneously.
CPU Voltage/ CPU-NB Voltage/ DRAM Voltage
These tems are used to adjust the voltage of CPU, CPU-NB and memory.
Overclockng pro󰘰les
Press <Enter> to enter the sub-menu.
Overclockng Pro󰘰le 1/ 2/ 3/ 4/ 5/ 6
Press <Enter> to enter the sub-menu. In the sub-menu, these tems are used to save
the current settngs, and you can to load the settngs from the stored pro󰘰le.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
www.devicemanuals.eu