To Next Page

To Previous Page

English

5. Locate the CPU fan connector on the motherboard.

6. Position the cooling set onto the retention mechanism. Hook one end of the clip

to hook 󰘰rst.

7. Then press down the other end of the clip to fasten the cooling set on the top of

the retention mechanism. Locate the Fix Lever and lift up it.

8. Fasten down the lever.

9. Attach the APU Fan cable to the APU fan connector on the motherboard.

Important



While disconnecting the Safety Hook from the 󰘰xed bolt, it is necessary to keep an

eye on your 󰘰ngers, because once the Safety Hook is disconnected from the 󰘰xed

bolt, the 󰘰xed lever will spring back instantly.



Con󰘰rm that the APU cooler has formed a tight seal with the APU before booting

your system.



Please refer to the documentation in the APU cooler package for more details

about APU cooler installation.

Questions and Answers:

Need help?

Do you have a question about the MSI A88XM-E35 V2 Series and is the answer not in the manual?

MSI A88XM-E35 V2 Series Specifications

General