To Next Page

To Previous Page

English

JBAT1: Clear CMOS Jumper

There is CMOS RAM onboard that is external powered from a battery located on the

motherboard to save system con󰘰guration data. With the CMOS RAM, the system

can automatically boot into the operating system (OS) every time it is turned on. If

you want to clear the system con󰘰guration, set the jumpers to clear the CMOS RAM.

Keep Data Clear Data

Important

You can clear the CMOS RAM by shorting this jumper while the system is o󰘯.

Afterwards, open the jumper . Do not clear the CMOS RAM while the system is on

because it will damage the motherboard.

JUSB_PW1, JUSB_PW2: USB Power Jumper

These jumpers are used to assign which USB and PS/2 ports could support “Wake

Up Event Setup 󰘰eld of BIOS.

JUSB_PW2

(for back panel

USB ports & PS/2

ports)

JUSB_PW1

(for onboard USB

connectors)

Support No Support (Default)

Questions and Answers:

Need help?

Do you have a question about the MSI A88XM-E35 V2 Series and is the answer not in the manual?

MSI A88XM-E35 V2 Series Specifications

General