15
OSD Menus
1st Level Menu 2nd/3rd Level Menu Description
MPRT OFF ∙ Brightness cannot be adjusted when
MPRT is set to ON.
∙ When MPRT is enabled, HDCR and
Brightness cannot be enabled and
will be grayed out.
∙ Response time will be grayed out
while MPRT is enabled.
∙ MPRT have to set to OFF while
FreeSync Premium is set to ON.
∙ PIP/PBP will be disabled while MPRT
set to ON.
∙ Screen Size will set to Auto if 1:1 is
selected.
ON
Refresh Rate Location Left Top ∙ Users can adjust Refresh Rate in any
mode.
∙ Default Refresh Rate Location is
Left Top. Location is adjustable in
OSD Menu. Press the OK Button to
confirm and apply your Refresh Rate
Location.
∙ This monitor follows and works at the
Operating System’s preset Screen
Refresh Rate.
Right Top
Left
Bottom
Right
Bottom
OFF
ON
Alarm Clock Location Left Top ∙ Users can adjust Alarm Clock in any
mode.
∙ After setting the time, press the OK
Button to activate the timer.
∙ Default Alarm Clock Location is
Left Top. Users can select their own
location.
Right Top
Left
Bottom
Right
Bottom
OFF
15:00 00:01 ~
99:59
30:00
45:00
60:00
To Next Page
Loading...
