14
OSD Menus
1st Level Menu 2nd/3rd Level Menu Description
MPRT OFF ∙ When MPRT is enabled, Brightness
cannot be enabled and will be grayed
out.
∙ Response time will be grayed out
while MPRT is enabled.
∙ MPRT is available when the refresh
rate is over 85Hz.
ON
Refresh Rate Location Left Top ∙ Location is adjustable in OSD Menu.
Press the OK Button to confirm and
apply your Refresh Rate Location.
∙ This monitor follows and works at the
Operating System’s preset Screen
Refresh Rate.
Right Top
Left
Bottom
Right
Bottom
Customize
OFF
ON
Alarm Clock Location Left Top ∙ After setting the time, press the OK
Button to activate the timer.
∙ Users can select their own location.
Right Top
Left
Bottom
Right
Bottom
Customize
OFF
15:00 00:01 ~
99:59
30:00
45:00
60:00
To Next Page
Loading...
