30
Overview of Components
SATA1~6: SATA 6Gb/s Connectors
These connectors are SATA 6Gb/s interface ports. Each connector can connect to one
SATA device.
SATA5
SATA2
SATA3
SATA6
SATA4
SATA1
Important
y
SATA1 will disable when a M.2 SATA module is installed in M.2 (M2_1) slot.
y
Please do not fold the SATA cable at a 90-degree angle. Data loss may result during
transmission otherwise.
y
SATA cables have identical plugs on either sides of the cable. However, it is
recommended that the flat connector be connected to the motherboard for space
saving purposes.
JLED1: LED connector
This connector allows you to connect the single color LED strip.
Important
y
This connector supports 5050 single-color LED strips within 2 meters.
y
Always turn off the power supply and unplug the power cord from the power outlet
before installing or removing the LED strip.
1
1 Power 2 NC
3 Ground 4 NC
1
To Next Page
Loading...
