MSI B660M BOMBER DDR4 User Manual

10
DIMM Slots
Please install the memory module into the DIMM slot as shown below.

Important
 To ensure system stability for Dual channel mode, memory modules must be of the
same type, number and density.
 Some memory modules may operate at a lower frequency than the marked value
when overclocking due to the memory frequency operates dependent on its Serial
Presence Detect (SPD). Go to BIOS and find the DRAM Frequency to set the memory
frequency if you want to operate the memory at the marked or at a higher frequency.
 It is recommended to use a more efficient memory cooling system for full DIMMs
installation or overclocking.
 The stability and compatibility of installed memory module depend on installed CPU
and devices when overclocking.
 Please refer to www.msi.com for more information on compatible memory.
1
3
2
2
M2_WIFI1: M.2 Slot (Key E, for PRO H610M-G DDR4 &
PRO H610M-B DDR4 )
Please install PCIe Wi-Fi module into M2_WIFI1 slot as shown below.
30º
30º
1
3
2

MSI B660M BOMBER DDR4 Specifications

General

Chipset	Intel B660
Form Factor	Micro ATX
Memory Type	DDR4
Socket	LGA 1700
Memory Slots	4
Maximum Memory	128 GB
Memory Speed	Up to 4800 MHz (OC)
PCIe x16 Slots	1
M.2 Slots	2
SATA Ports	4
Audio	Realtek ALC897
Storage	2 x M.2 slots
USB Ports	USB 3.2 Gen 1, USB 2.0
LAN	Realtek 2.5Gbps LAN
Video Outputs	1 x HDMI, 1 x DisplayPort
PCIe Slots	2 x PCIe 3.0 x1