MSI B85-G43 GAMING - Page 49

English
En-35
CPU Core Voltage O󰘯set Mode/ CPU Ring Voltage O󰘯set Mode/ CPU GT Voltage
O󰘯set Mode/ CPU SA Voltage O󰘯set Mode/ CPU IO Analog Voltage O󰘯set Mode/ CPU
IO Digital Voltage O󰘯set Mode [Auto]
Selects the voltage o󰘯set modes.
[Auto] This setting will be con󰘰gured automatically by BIOS.
[+] Allows you to set the positive o󰘯set voltage.
[-] Allows you to set the negative o󰘯set voltage.
CPU Core Voltage O󰘯set/ CPU Ring Voltage O󰘯set/ CPU GT Voltage O󰘯set/ CPU SA
Voltage O󰘯set/ CPU IO Analog Voltage O󰘯set/ CPU IO Digital Voltage O󰘯set [Auto]
Set the o󰘯set values for these voltages.
Current CPU Core Voltage/ Current CPU Ring Voltage/ Current CPU GT Voltage/
Current CPU SA Voltage/ Current CPU IO Digital Voltage
Show the current voltages. Read-only.
Internal VR OVP OCP Protection [Auto]
Enables or disables the over-voltage protection and over-current protection for CPU
internal VR (Voltage Regulator).
[Auto] This setting will be con󰘰gured automatically by BIOS.
[Enabled] Sets the voltage limit on the CPU internal VR for over-voltage protection
and over-current protection.
[Disabled] Disables this function for overclocking.
Internal VR E󰘲ciency Management [Auto]
Enables or disables the CPU internal VR e󰘲ciency management.
[Auto] This setting will be con󰘰gured automatically by BIOS.
[Enabled] Enables the VR e󰘯ciency management for power-saving control.
[Disabled] Disables this function.
DRAM Voltage [Auto]
Sets the memory voltage. If set to "Auto", BIOS will set memory voltage automatically
or you can set it manually.
Current DRAM Voltage
Shows current memory voltage. Read only.
PCH 1.05 Voltage/ PCH 1.5 Voltage [Auto]
Set these voltages. If set to "Auto", BIOS will set these voltages automatically or you
can set it manually.
Current PCH 1.05 Voltage
Shows current PCH 1.05 voltage. Read only.
CPU Memory Changed Detect [Enabled]
Enables or disables the system to issue a warning message during boot when the CPU
or memory has been replaced.
[Enabled] The system will issue a warning message during boot and than needs to
load the default settings for new devices.
[Disabled] Disables this function and keeps the current BIOS settings.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶