To Next PageTo Next Page
Need help?Do you have a question about the MSI B85MP33 Series and is the answer not in the manual?
General| Socket | LGA 1150 |
|---|---|
| Chipset | Intel B85 |
| Form Factor | Micro ATX |
| Memory Slots | 2 |
| Max Memory | 16 GB |
| Memory Type | DDR3 |
| PCI Express x16 | 1 |
| PCI Express x1 | 1 |
| SATA 6Gb/s | 4 |
| SATA 3Gb/s | 2 |
| USB 3.0 Ports | 2 |
| Audio | Realtek ALC887 |
| Memory Standard | DDR3 1600/1333/1066 MHz |
| LAN | Realtek 8111G |
| USB 2.0 Ports | 8 (4 rear, 4 via headers) |
Details supported Intel processors for LGA 1150 socket.
Specifies the Intel H81/ H87/ B85 Express Chipset.
Information on DDR3 memory slots, speeds, and architecture.
Details PCIe x16 and PCIe x1 slot types and configurations.
Lists supported video output ports and maximum resolutions.
Covers SATA ports, RAID support, and Intel technologies.
Details USB 3.0 and USB 2.0 port availability.
Specifies the Realtek ALC887 Audio Codec.
Details the Realtek RTL8111G Gigabit LAN controller.
Lists physical ports available on the motherboard's rear.
Details UEFI AMI BIOS and supported ACPI/PnP/SM BIOS/DMI versions.
Specifies the motherboard's dimensions as Micro-ATX.
Diagram showing rear I/O ports for specific models.
Diagram showing rear I/O ports for specific models.
Table explaining the status and description of LAN LEDs.
Link to a video guide for CPU and heatsink installation.
Crucial warnings about handling CPU, socket contacts, and alignment.
Link to a video guide for installing memory modules.
Guidelines on DDR3 compatibility and dual-channel setup.
Details on connecting the ATX power supply to the motherboard.
Description of the 16550A high-speed serial port.
Information on connecting SATA devices like HDDs and SSDs.
Important guidelines for SATA cable connection and device installation.
Explains the chassis intrusion switch connection and warning system.
Details on CPUFAN and SYSFAN connectors for system cooling fans.
Important advice on heatsink selection and fan blade clearance.
Guides for connecting front panel switches and LEDs.
Details on connecting USB 2.0 peripherals.
Important notes on connector orientation and positive wire identification.
Connects the front panel audio jacks to the motherboard.
Connects to a Trusted Platform Module (TPM) for security.
Procedure for clearing CMOS settings by shorting the jumper.
Enables/disables USB wake-up functionality.
Warnings regarding clearing CMOS and power supply requirements for USB wake-up.
Description of PCIe 2.0 x1 and PCIe 3.0 x16 slots.
Important safety precautions for adding or removing expansion cards.
Explains when to run BIOS setup and the benefits of default settings.
Instructions on how to access the BIOS menu via DEL or F11 keys.
Advice on restoring defaults and using the MSI Fast Boot utility.
Identifies key elements like temperature monitor and menu selection.
Shows the OC menu interface for overclocking settings.
Warnings about manual overclocking risks and the use of OC Genie.
Adjusts CPU Ratio Mode, CPU Ratio, and Turbo Boost settings.
Configures Enhanced Turbo function and adjusts Ring Ratio.
Sets the DRAM frequency for memory performance.
Allows manual configuration of DRAM timings for memory channels.
Controls memory initialization and sets DRAM voltage.
Reduces EMI but may affect overclocking stability.
Guidance on EMI reduction, stability trade-offs, and overclocking.
Enables or disables Hyper-Threading for improved multitasking.
Manages CPUID values and enables execute protection against malware.
Configures Intel Virtualization Tech and hardware prefetchers.
Enables AES instructions and adaptive thermal monitoring.
Manages CPU power states for idle system power saving.
Configures C1E support and limits CPU power saving states.
Enables Intel Lake Tiny feature for SSD performance enhancement.
Configures long and short duration power limits for Turbo Boost.
Sets CPU current limit and ratios for multi-core turbo boost.
