MSI Creator PS321QR - Page 28

2-9
OSD Setup
2-8
1st Level Menu 2nd/ 3rd Level Menu Description
Saturation R 0-100 ■ Default is 50 for all Saturation items
shipment setting, end user can adjust
these 󰘱exibility, unless otherwise
speci󰘰ed.
■ Default is 0 for the Black-White mode
only�
■ In the regular Color mode: Adobe
RGB, sRGB, Display P3 and DICOM
that Saturation was gray out�
G 0-100
B 0-100
C 0-100
M 0-100
Y 0-100
Hue R 0-100 ■ Default is 50 for all Hue items
shipment setting, end user can adjust
these 󰘱exibility, unless otherwise
speci󰘰ed.
■ In the regular Color mode: Adobe
RGB, sRGB, Display P3 and DICOM
that Hue was gray out�
G 0-100
B 0-100
C 0-100
M 0-100
Y 0-100
Zoom In ON ■ Default is OFF for shipment setting,
end user can adjust Zoom In location
󰘱exibility.
OFF
Location Center
Up-Left
Up-Right
Down-Left
Down-Right
Screen Size Auto ■ Users can adjust Screen Size in any
mode, any resolution and any screen
refresh rate�
■ Default is Auto�
4:3
16:9
1:1
h Input Source
1st Level Menu 2nd/3rd Level Menu Description
HDMI1 Users can adjust Input Source in any
Mode�
HDMI2
DP
Type C
Auto Scan User can press “Navi Key Button” then
select input source at below status:
■ While “Auto Scan” was set to “OFF”
and monitor at power saving mode�
■ While “No Signal” message box is
shown on monitor�