77
BIOS Setup
OC
⚠
Important
∙
Overclocking your PC manually is only recommended for advanced users.
∙
Overclocking is not guaranteed, and if done improperly, it could void your warranty
or severely damage your hardware.
∙
If you are unfamiliar with overclocking, we advise you to use OC GENIE 4 function for
easy overclocking.
▶ OC Explore Mode [Expert]
Enables or disables to show the normal or expert version of OC settings.
[Normal] Provides the regular OC settings in BIOS setup.
[Expert] Provides the advanced OC settings for OC expert to configure in BIOS
setup.
Note: We use * as the symbol for the OC settings of Expert mode.
▶ CPU Ratio Apply Mode [All Core]*
Sets applied mode for CPU ratio. This item only appears when a CPU that supports
Turbo Boost is installed.
[All Core] Enables the CPU Ratio. All CPU cores will run the same CPU ratio that
be set in CPU Ratio.
[Per Core] Enables the Core 0~X. Sets each CPU core ratio separately in Core 0~X.
[Turbo Ratio] Enables the Numbers of CPU Cores of Group X and Target CPU Turbo
Ratio Group 1. This option only appears when a CPU that supports this
function is installed.
▶ CPU Ratio [Auto]
Sets the CPU ratio that is used to determine CPU clock speed. This item can only be
changed if the processor supports this function.
▶ Numbers of CPU Cores of Group X [Auto] *
Sets the numbers of CPU cores as a group for running target CPU Turbo Ratio. This
item only appears when a CPU that support this function is installed.
To Next Page
Loading...
