79
BIOS Setup
▶ CPU Base Clock Apply Mode [Auto]*
Sets the applying mode for adjusted CPU base clock.
[Auto] This setting will be configured automatically by BIOS.
[Next Boot] CPU will run the adjusted CPU base clock after rebooting.
[Immediate] CPU runs the adjusted CPU base clock immediately.
▶ Clockgen Features (optional)
Press Enter to enter the sub-menu. Sets the detailed clockgen features.
▶ Dynamic Frequency Control [Disabled]
system. This item will be disabled when the Dynamic Frequency Search is enabled.
▶ DFC Baseline (MHz) [Auto]
Sets initial BCLK for dynamic overclocking if not reach the threshold. This item will
be available when the Dynamic Frequency Control is enabled
▶ Threshold 1~3 (A) [Auto]
Sets the CPU current as the threshold for Dynamic Frequency Control. When
CPU current reaches the value, it will run the Level 1/ 2/ 3 BCLK for dynamic
overclocking. These items will appear when the Dynamic Frequency Control is
enabled.
▶ Level 1~3 BCLK (MHz) [Auto]
Sets the CPU BCLK for the threshold. These items will appear when the Dynamic
Frequency Control is enabled.
▶ Dynamic Frequency Search [Disabled]
Enables or disables to run the optimized dynamic BCLK. This item will be disabled
when the Dynamic Frequency Control is enabled.
▶ Dynamic Frequency Search Mode [Once]
Sets the search mode of the dynamic BCLK. This item will be available when the
Dynamic Frequency Search is enabled.
[Once] Run once in the next system boot.
[Each Power On] Run in every time when system is powered on.
▶ Dynamic Frequency Search Step (MHz) [Auto]
this setting automatically. This item will be available when the Dynamic Frequency
Search is enabled.
▶ BCLK Amplitude [Auto]
get higher overclocking.
▶ SRC Clock Amplitude [Auto]
Sets the value for SRC clock Amplitude.
To Next Page
Loading...
