25
OSD Menus
Input Source
1st Level Menu 2nd Level Menu Description
HDMI1 ∙ Users can adjust Input Source in any mode.
HDMI2
DP
Auto Scan OFF ∙ Users can use the Navi Key to select Input
Source at below status:
•While “Auto Scan” is set to “OFF” with the
monitor at power saving mode;
•While “No Signal” message box is shown
on the monitor.
ON
Navi Key
1st Level Menu 2nd Level Menu Description
Up
Down
Left
Right
OFF ∙ All Navi Key items can be adjusted via
OSD Menus.
Brightness
Game Mode
Screen
Assistance
(for G27C5
E2/ G27C6 E2/
G27C6P E2)
Smart Crosshair
(for G27CQ5)
Alarm Clock
Input Source
Refresh Rate
Info. On Screen
Night Vision
To Next Page
Loading...
Need help?
General