3-20
MS-7379 Mainboard
Chassis Intrusion
The field enables or disables the feature of recording the chassis intrusion status
and issuing a warning message if the chassis is once opened. To clear the warning
message, set the field to [Reset]. The setting of the field will automatically return to
[Enabled] later.
CPU/SYS Smart FAN Target
The mainboard provides the Smart Fan function which can control the CPU/System
fan speed automatically depending on the current temperature to keep it with in a
specific range. You can select a fan target value here. If the current CPU/System fan
temperature reaches to the target value, the smart fan function will be activated. It
provides several sections to speed up for cooling down automaticlly.
CPU Min.FAN Speed (%)
This field is used to set the minimum CPU fan speed.
PC Health Status
CPU/ System Temperature, CPU FAN/ SYS FAN1 Speed, CPU Vcore, 3.
3V, 5V, 12V, 3VSB
These items display the current status of all of the monitored hardware devices/
components such as CPU voltage, temperatures and all fans’ speeds.
H/W Monitor
To Next Page
Loading...
Need help?
General
