To Next PageTo Next Page
Need help?Do you have a question about the MSI G41M-P33 Combo and is the answer not in the manual?
General| Form Factor | Micro ATX |
|---|---|
| Chipset | Intel G41 |
| CPU Socket | LGA 775 |
| Max Memory | 8 GB |
| PCI Express x16 | 1 |
| PCIe x1 Slots | 1 |
| PCI Slots | 2 |
| SATA Ports | 4 |
| IDE Ports | 1 |
| RAID Support | No |
| USB Ports | 8 (4 on back panel, 4 via headers) |
| Audio | Realtek ALC888 |
| LAN | Realtek Gigabit Ethernet |
| Video Outputs | VGA |
Recommended steps to resolve radio frequency interference issues.
Statements regarding modifications and shielded cables for compliance.
Intellectual property and brand ownership statements.
List of registered trademarks owned by various companies.
Essential safety guidelines for equipment operation and handling.
Warnings regarding battery replacement and environmental conditions.
Information regarding the Waste Electrical and Electronic Equipment directive.
Diagram showing component placement and connector identification.
Description of external connectors on the computer's rear panel.
Details of internal connectors on the mainboard for various devices.
Information on PCIE and PCI slots for adding expansion cards.
Mainboard dimensions and physical mounting hole specifications.
Instructions for correctly aligning and securing the mainboard in the chassis.
Step-by-step instructions for installing the CPU and its cooling solution.
Procedure for inserting RAM modules into the DIMM slots correctly.
Details on connecting the main ATX power supply.
Details on connecting the auxiliary CPU power supply.
Information on high-speed Serial ATA ports for connecting storage devices.
Details on connecting CPU and system fans for cooling.
Connecting front panel power, reset, and status indicator LEDs.
Connecting front panel headphone and microphone jacks.
Connecting front panel USB ports for peripherals.
Procedure for clearing CMOS settings using the JBAT1 jumper.
Configuring USB ports for standby power (5VSB) or normal power (VCC5).
Enabling/disabling EuP for reduced power consumption in standby modes.
Information on PCIE x16 and x1 slots for expansion cards.
Information on PCI slots for add-on cards.
Details on how PCI interrupts are routed to the microprocessor.
Instructions on how to access the BIOS setup utility.
Overview of the main BIOS setup screen and key controls.
Descriptions of main BIOS configuration categories like Standard CMOS, Advanced Features.
Advanced settings for CPU and DRAM frequency/voltage control.
Utility for reading and flashing the BIOS from USB media.
Options for loading fail-safe or optimized default BIOS settings.
Procedures for saving changes or exiting the BIOS setup.
Display of current CPU and DRAM frequencies.
Configuration options for CPU features like EIST and C1E support.
Settings for CPU power management and enhanced halt states.
Adjusting the CPU base clock frequency for performance tuning.
Choosing manual or SPD-based control for DRAM timing parameters.
Detailed settings for CAS Latency, tRCD, tRP, and tRAS.
Settings for tRTP, tRFC, tWR, tRRD, and tWTR timing controls.
Configuring the ratio between Front Side Bus and memory frequency.
Option to disable clocks for empty slots to reduce EMI.
Adjusting voltages for CPU, North Bridge, and DRAM.
Enabling Spread Spectrum to reduce EMI, with performance considerations.
Procedure to load factory default settings for stable performance.
Table detailing hazardous substance content in product components.
