17
1. Power on the computer.
2. Insert the Windows® 7/ 8.1/ 10 disc into your optical drive.
Due to chipset limitation, during the Windows® 7 installation process, USB
optical drives and USB pen drives are not supported.
3. Press the button on the computer case.
4. For windows 8.1/ 10, skip this step. For Windows 7, access the BIOS menu
and set the item
to enabled, save changes and restart.
It is suggested to plug in your USB Keyboard/USB Mouse to the leftmost
USB port when installing Windows 7.
5. Press F11 key during the computer POST (Power-On Self Test) to get into Boot
Menu.
6. Select your optical drive from the Boot Menu.
7. Press any key when screen shows
message.
8. Follow the instructions on the screen to install Windows® 7/ 8.1/ 10.
1. Start up your computer in Windows® 7/ 8.1/ 10.
2. Insert MSI® Driver Disc into your optical drive.
3. The installer will automatically appear and it will find and list all necessary
drivers.
4. Click button.
5. The software installation will then be in progress, after it has finished it will
prompt you to restart.
6. Click button to finish.
7. Restart your computer.
Before you install utilities, you must complete drivers installation.
1. Insert MSI® Driver Disc into your optical drive.
2. The installer will automatically appear.
3. Click tab.
4. Select the utilities you want to install.
5. Click button.
6. The utilities installation will then be in progress, after it has finished it will
prompt you to restart.
7. Click button to finish.
8. Restart your computer.
To Next Page
Loading...
