MSI H55M-E32 series - Page 56

3-20
BIOS Setup
MS-7636
Chapter 3
BIOS Setup
MS-7636
Chapter 3
Actve Processor Cores
Ths tem allows you to select the number of actve processor cores.
Intel EIST
The Enhanced Intel SpeedStep technology allows you to set the performance level of
the mcroprocessor whether the computer s runnng on battery or AC power. Ths 󰘰eld
wll appear after you nstalled the CPU whch supports speedstep technology.
C1E Support
To enable ths tem to read the CPU power consumpton whle dle. Not all processors
support Enhanced Halt state (C1E).
Intel Turbo Boost
Ths tem wll appear when you nstall a CPU wth Intel Turbo Boost technology. Ths
tem s used to enable/ dsable Intel Turbo Boost technology. It can scale processor
frequency hgher dynamcally when applcatons demand more performance and TDP
headroom exsts. It also can delver seamless power scalablty (Dynamcally scale up,
Speed-Step Down).
Adjust CPU Base Frequency (MHz)
Ths tem allows you to set the CPU Base clock (n MHz). You may overclock the CPU
by adjustng ths value. Please note the overclockng behavor s not guaranteed.
Adjust CPU Rato
Ths tem allows you to adjust the CPU rato. Settng to [Startup] enables the CPU run
-
nng at the fastest speed whch s detected by system.
Adjusted CPU Frequency (MHz)
It shows the adjusted CPU frequency (Base clock x Rato). Read-only.
Current GPU Frequency
These tems show the current frequences of GPU. Read-only.
MEMORY-Z
Press <Enter> to enter the sub-menu and the followng screen appears.
DIMM1~2 Memory SPD Informaton
Press <Enter> to enter the sub-menu. The sub-menu dsplays the nformatons of
nstalled memory.
Current DRAM Channel1~2 Tmng
It shows the nstalled DRAM Tmng. Read-only.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶