3-9
BIOS Setup
HDD-1 The system will boot from the second HDD.
HDD-2 The system will boot from the third HDD.
HDD-3 The system will boot from the fourth HDD.
ZIP100 The system will boot from ATAPI ZIP100 drive.
USB-FDD The system will boot from the USB-interfaced
floppy drive.
USB-ZIP The system will boot from the USB-interfaced
ZIP drive.
USB-CDROM The system will boot from the USB-interfaced
CD-ROM.
USB-HDD The system will boot from the USB-interfaced
HDD.
LAN The system will boot from the Network drive.
Disabled Disable this sequence.
Boot Other Device
Setting the option to Enabled allows the system to try to boot from other
device if the system fails to boot from the 1st/2nd/3rd boot device.
CPU Internal/External Cache
The item allows you to turn on or off CPU’s internal (L1) and external (L2)
cache. Settings: Enabled, Disabled.
CPU L2 Cache EEC Checking
The item allows you to enable or disable the EEC (Error-Correcting Code)
feature for error detection and correction when data passes through L2 cache
memory. Settings: Enabled, Disabled.
Swap Floppy Drive
Setting to Enabled will swap floppy drives A: and B:.
Seek Floppy
Setting to Enabled will make BIOS seek floppy drive A: before booting the
system. Settings: Disabled, Enabled.
MSI Reminds You...
Available settings for “1st/2nd/3rd Boot Device” vary depend-
ing on the bootable devices you have installed. For example, if
you did not install a floppy drive, the setting “Floppy” does not
show up.
To Next Page
Loading...
Need help?
General
