18
MSI OLED Care
1st Level Menu 2nd/3rd Level Menu Description
Pixel Shift Slow ∙ Pixel Shift moves the pixels of your screen at
regular intervals to reduce the possibility of
screen burn-in or image retention.
Normal
Fast
Panel Protect
∙ To maintain panel image quality, panel protect
function will automatically activate when
monitor using over 4 hours.
∙ This protect function may take several minutes
to complete.
∙ The power indicator will blink orange color until
process done.
∙ During process executing, please do not unplug
the power cord from monitor.
∙ During process executing, press power button
again to cancel this function.
Protect Notice Auto ∙ When set to Auto, Protect Notice will pop up
when the panel exceeds 4 hours of cumulative
usage.
∙ When set to Usage 16 hrs, Protect Notice will
pop up when the panel exceeds 16 hours of
cumulative usage.
∙ When Panel Protect is interrupted, Protect
Notice will pop up upon next power-up.
Usage 16 hrs
Static Screen
Detection
OFF ∙ If Static Screen Detection is set to ON:
• When detecting static visuals over long
periods of time, the monitor reduces
brightness to prevent screen burn-in.
• Once detecting moving visuals, the monitor
restores its previous brightness setting.
ON
Starting in 50 Sec ∙ Starting in detects the time a static image
remains on the screen.
100 Sec
Time required 120 Sec ∙ Time required specifies the time for brightness
reduction after detecting a static image for
50/100 seconds.
∙ The brightness reduction level depends on the
setting of Reducing Level.
240 Sec
Reducing Level 1-7 ∙ Users can select a level for brightness
reduction.
∙ Reducing effect depends on Brightness/
DisplayHDR setting.
To Next Page
Loading...
Need help?
General
