36
f
Enables or disables the system to issue a warning message during boot when the
memory has been replaced.
[Enabled] The system will issue a warning message during boot and then you have
to load the default settings for new devices.
[Disabled] Disables this function and keeps the current BIOS settings.
f
Press Enter
installed CPU. You can also access this information menu at any time by pressing [F4].
Read only.
f
Press Enter
installed CPU. Read only.
f
Press Enter
timings of installed memory. You can also access this information menu at any time by
pressing [F5].
fDIMMx Memory SPD
Press Enter
installed memory. Read only.
f
Press Enter
f
the installed CPU supports this technology.
f
f
Enables/ disables Opcache. Opcache stores recent decode instruction to save
the decoding time when the instruction is repeated. And it may increase the CPU
performance and reduce the power consumption slightly.
f
Enables/disables the IOMMU (I/O Memory Management Unit) for I/O Virtualization.
f
This function reduces the EMI (Electromagnetic Interference) generated by
modulating clock generator pulses.
[Enabled] Enables the spread spectrum function to reduce the EMI
(Electromagnetic Interference) problem.
[Disabled] Enhances the overclocking ability of CPU Base clock.
To Next Page
Loading...
