Chapter 3
3-12BIOS Setup 3-13 BIOS Setup
Power Management Setup
Sets system Power Management of EuP2013 and AC Power Loss behaviors. Press
<Enter> to enter the sub-menu.
EuP 2013 [Disabled]
Enables or disables the system power consumption according to EuP2013 regula-
tion.
-
ulation.
[Disabled] Disables this function.
PCIe devices.
Restore after AC Power Loss [Power Off]
Sets the system behaviors while encountering the AC power loss.
[Power On] Boot up the system after restoring AC power.
before AC power loss.
On Function board LED Control [On]
Enables or disables the onboard non-function LEDs.
[On] Enables onboard non-function LEDs.
sub-menu.
Windows 8/ 8.1 Feature [Disabled]
Enables the supports for Windows 8 or disables for other operating systems. Before
should meet the Windows 8 requirements.
[Enabled] The system will switch to UEFI mode to meet the Windows 8
requirement.
[Disabled] Disables this function.
MSI Fast Boot [Disabled]
MSI Fast Boot is the fastest way to boot the system. It will disable more devices to
speed up system boot time which is faster than the boot time of “Fast Boot”.
[Enabled] Enables the MSI Fast Boot function to speed up booting time. And the
[Disabled] Disables MSI Fast Boot.
Fast Boot [Disabled]
Enables or disables the Windows 8 fast boot feature. This item will only be available
when "MSI Fast Boot" is disabled.
To Next Page
Loading...
