Chapter 3
3-20BIOS Setup 3-21 BIOS Setup
Filter PLL [Auto]*
supports this setting.
[Enabled] Provides wide range of base clock for overclocking when base clock
strap be set to higher value.
[Disabled] Provides normal range of base clock.
< DRAM Setting >
DRAM Reference Clock [Auto]*
Sets the DRAM reference clock. The valid value range depends on the installed CPU.
This item appears when a CPU that supports this adjustment is installed.
DRAM Frequency [Auto]
Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed.
Adjusted DRAM Frequency
Shows the adjusted DRAM frequency. Read-only.
This item will be available when you install the memory modules that support X.M.P.
technology.
[Disabled] Disables this function.
Load Memory Presets [Disabled]*
Selects the preset memory overclocking parameters, that includes voltage and timing,
Important
memory module type and quality.
Memory Try It ! [Disabled]
Memory Try It! works for improving memory compatibility or performance by choosing
DRAM Timing Mode [Auto]
Selects the memory timing mode.
[Auto] DRAM timings will be determined based on SPD (Serial Presence
Detect) of installed memory modules.
channel.
memory channel.
To Next Page
Loading...
