CHAPTER 2 HARDWARE INSTALLATION
2-40
2.19 Power Saving LED Connector: JGL1
JGL1 can be connected with two-color LED. There are two type of LED that
you can use: 3-pin LED or 2-pin LED(ACPI request). LED will lit while the
system is in suspend mode.
JGL1
+
1
3
3-pin LED 2-pin LED
1
3
Green Color
Orange
Color
1
3
Green Color
Orange
Color
1-2 Single Color 1-2 Dual Color
1-3 Blink
To Next Page
Loading...
