MSI MS-6178 - 3.7 Integrated Peripherals

CHAPTER 3 AWARD
®
BIOS SETUP
3-16
3.7 Integrated Peripherals
OnChip Primary PCI IDE Enabled
OnChip Secondary PCI IDE Enabled
IDE Primary Master PIO Auto
IDE Primary Slave PIO Auto
IDE Secondary Master PIO Auto
IDE Secondary Slave PIO Auto
IDE Primary Master UDMA Auto
IDE Primary Slave UDMA Auto
IDE Secondary Master UDMA Auto
IDE Secondary Slave UDMA Auto
USB Controller Enabled
USB Keyboard Support Disabled
Init Display First PCI Slot
AC97 Audio Disabled
AC97 Modem Enabled
Onboard Audio Device Enabled
IDE HDD Block Mode Enabled
Power On Function
KB Power On Password
Hot Key Power On
Onboard FDC Controller Enabled
Onboard Serial Port 1 3F8/IRQ4
Onboard Serial Port 2 2F8/IRQ3
Item Help
Menu Level >
↑ ↓ → ← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-safe defaults F7:Optimized Defaults
CMOS Setup Utility - Copyright(C) 1984-1999 Award Software
Integrated Peripherals
UART Mode Select Normal
RxD, TxD Active Hi, Lo
IR Transmition Delay Enabled
UR2 Duplex Mode Half
USE IR Pins IR-Rx2Tx2
Onboard Parallel Port 378/IRQ7
Parallel Port Mode SPP
EPP Mode Select EPP 1.7
ECP Mode use UDMA 3
PWRON After PWR-Fail Off
Game Port Address Disabled
Midi Port Address Disabled
Midi Port IRQ 5
Power Status LED Blinking
OnChip Primary/Secondary PCI IDE
The integrated peripheral controller contains an IDE interface
with support for two IDE channels. Select Enabled to activate each
channel separately. The settings are: Enabled and Disabled.