MSI MS-6178 - Page 87

CHAPTER 2 HARDWARE INSTALLATION
2-28
2.23 Keyboard Power: JKBV1
The JKBV1 jumper is for setting keyboard power. This function should be
set in the BIOS for the keyboard Wake-up function.
JKBV1
1
3
5V (default)
Disable keyboard
power on function
5V Standby
Enable keyboard
power on function
1
3
1
3
Note: To be able to use this function, you need a power supply that
provide enough power for this feature. (750mA power
supply with 5V Stand-by)