CHAPTER 3 AWARD
®
BIOS SETUP
3-24
State After Power Failure
This option will determine how the system will power on after a
power failure.
Wake Up Events
VGA Off
LPT & COM LPT/COM
HDD & FDD On
PCI Master Off
Power On by PCI Card Disabled
Wake Up On LAN/Ring Disabled
RTC Alarm Resume Disabled
x Date (of Month) 0
x Resume Time 0:0:0
Primary INTER ON
IRQs Activity Monitoring Press Enter
Item Help
Menu Level >
↑ ↓ → ← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-safe defaults F7:Optimized Defaults
VGA
When Enabled, you can set the VGA to awaken the system.
LPT & COM
When LPT & COM is On, any activity from one of the listed system
peripheral devices or IRQs wakes up the system
HDD & FDD
When HDD & FDD is On, any activity from one of the listed
system peripheral devices or IRQs wakes up the system
PCI Master
When PCI Master is On, any activity from one of the listed system
peripheral devices or IRQs wakes up the system
To Next Page
Loading...
