Getting Started
1-5
Quick Components Guide
Component Function Reference
Socket 478 Installing CPU See p. 2-2
DDR1~2 Installing DDR modules See p. 2-5
ATX Power Connector Installing power supply See p. 2-7
USB Connectors Connecting to USB devices See p. 2-9
COM A & COM 2 Serial port connector See p. 2-10
VGA DB15 Connector Connecting to VGA monitor See p. 2-10
RJ-45 LAN Jack Connecting to LAN devices See p. 2-11
LPT1 Parallel port connector See p. 2-12
FDD1 Floppy disk drive connector See p. 2-13
PWRSW1 Independent power switch See p. 2-13
IDE1~ IDE2 Hard disk connectors See p. 2-14
CDIN1/CDIN2 CD-in connector See p. 2-15
MDM_IN1 Modem-in connector See p. 2-15
CPUFAN1/PWR/SYS_FAN Fan power connectors See p. 2-16
JCASE Chassis intrusion switch See p. 2-17
IR1 IrDA infrared module connector See p. 2-17
WOM1 Wake On Ring connector See p. 2-18
WOL1 Wake On LAN connector See p. 2-18
JFP1 or PANEL1 Front panel connector See p. 2-19
JAUDIO1 or F_AUDIO Front panel audio connector See p. 2-20
USB1/2 or USB3/4 Front USB connector See p. 2-22
CLR_CMOS Clear CMOS jumper See p. 2-23
LAN_EN LAN enable/disable jumper See p. 2-24
AGP Slot Connecting to AGP cards See p. 2-25
PCI Slots Connecting to expansion cards See p. 2-25
To Next Page
Loading...
