3-17
BIOS Setup
Note: For “Resume On PS2 Mouse From S3” function, you need to
DOUBLE click the mouse to power on the system if the function is
enabled.
PS2 Mouse Wake Select Mode
This item specifies the PS2 mouse wake-up mode. Setting options: Click
& Move, Click.
Keyboard Power On From S3
The item specifies how the system will be awakened from power saving
mode when input signal of the keyboard is detected. If set to Specific Key,
<Ctrl+Alt+BackSpace> is the only one Power On event. If set to Password,
please press <Enter> to input password and its maximum password is 5
character. Setting options: Disabled, Any Key, Specific Key, Password.
USB Wakeup From S1/S3
This item allows the activity of the USB device to wake up the system
from S1 & S3 sleep state. Settings: Enabled, Disabled.
Resume By Alarm
This is used to enable or disable the feature of booting up the system on
a scheduled time/date from the soft off (S5) state. Settings: Enabled,
Disabled.
RTC Alarm Date/Hour/Minute/Second
If Resume By Alarm is set to Enabled, the system will automatically
resume (boot up) on a specific date/hour/minute/second specified in
these fields. Available settings for each item are:
Alarm Date 01 ~ 31, Every Day
Alarm Hour 00 ~ 23
Alarm Minute 00 ~ 59
Alarm Second 00 ~ 59
MSI Reminds You...
If you have changed this setting, you must let the system boot up
until it enters the operating system, before this function will work.
To Next Page
Loading...
