110W(MS-N0E1)Disassembly Guide
2、MB ASSY
2.10:Remove the 1 screw (M2*3mm) that stabilize
the SSD. Then remove the SSD card.
Attention: the screw driver torque is 1.2-1.5Kgf-cm
Component P/N Qty
Screw
E43-1203003-H29
1
SSD
S78-4405100-S77
1
2.11:Remove the 1 screw (M2*3mm) that stabilize
the FAN.
Attention: the screw driver torque is 1.2-1.5Kgf-cm
Component P/N Qty
Screw
E43-1203003-H29
1
2.12:Remove the LVDS cable as pic shows.