14
OSD Menus
1st Level Menu 2nd/3rd Level Menu Description
Gamma 1.8 ∙ Users can adjust Gamma in any
mode.
2.0
2.2
2.4
2.6
DP YCbCR
sRGB
OFF ∙ DP YCbCR sRGB default is ON
with DisplayPort Input.
ON
HDMI YCbCR
sRGB
OFF ∙ HDMI YCbCR sRGB default is OFF
with HDMI Input.
ON
Screen Size Auto ∙ Users can adjust Screen Size in
any mode, any resolution and any
screen refresh rate.
Full Screen
Low Blue Light OFF ∙ Low Blue Light protects your
eyes against blue light. When
enabled, Low Blue Light adjusts
the screen color temperature to
a more yellow glow.
∙ Users can adjust Low Blue Light
in any mode.
∙ When set to Anti-Blue, it is
mandatory to enable Low Blue
Light.
ON
Input Source
1st Level Menu 2nd Level Menu Description
DP ∙ Users can adjust Input Source in any mode.
HDMI1
HDMI2
Auto Scan OFF ∙ Users can use the Navi Key to select Input
Source at below status:
• While “Auto Scan” is set to “OFF” with the
monitor at power saving mode;
• While “No Signal” message box is shown
on the monitor.
ON
To Next Page
Loading...
