11
OSD Menus
1st Level Menu 2nd/3rd Level Menu Description
MPRT OFF ∙ When MPRT is enabled, Brightness
cannot be enabled and will be grayed
out.
∙ MPRT and HDCR cannot be enabled
simultaneously.
∙ Response time will be grayed out
while MPRT is enabled.
∙ MPRT has to be disabled while
Adaptive-Sync is set to ON.
∙ MPRT is available when the refresh
rate is over 85Hz.
ON
Refresh Rate Location Left Top ∙ Location is adjustable in OSD Menu.
Press the Middle Button to confirm
and apply your Refresh Rate Location.
∙ This monitor follows and works at the
Operating System’s preset Screen
Refresh Rate.
Right Top
Left
Bottom
Right
Bottom
OFF
ON
Alarm Clock Location Left Top ∙ After setting the time, press the
Middle Button to activate the timer.
∙ Users have to manually restore their
preset Alarm Clock after any AC
power loss and reconnection.
Right Top
Left
Bottom
Right
Bottom
OFF
15:00 00:01 ~
99:59
30:00
45:00
60:00
To Next Page
Loading...
