2-7
OSD Setup
2-6
1st Level Menu 2nd/3rd Level Menu Description
FreeSync
(OFF)
■ FreeSync prevents screen tearing�
■ HDMI default is ON but grayed out (cannot
be changed)�
■ DisplayPort default is ON and can be
adjusted ON/OFF in any mode, any
resolution, any input source and any screen
refresh rate�
■ When FreeSync is enabled, Anti Motion Blur
will be grayed out�
(ON)
h Professional
1st Level Menu 2nd Level Menu Description
Pro Mode User Default mode� All items can be adjusted by users�
Reader All items can be adjusted, except for Brightness,
Contrast and Eye Saver�
Cinema All items can be adjusted, except for Brightness,
Contrast and Image Enhancement�
Designer All items can be adjusted, except for Black Tuner,
Brightness and Contrast�
■ Use Up or Down Button to select and preview mode eects.
■ Press the Middle Button to conrm and apply your mode type.
Eye Saver
(OFF)
■ Eye Saver protects your eyes against blue light�
When enabled, Eye Saver adjusts the screen color
temperature to a more yellow glow�
■ Users can adjust Eye Saver in any Mode�
■ When Pro Mode is set to Reader, it is mandatory to
enable Eye Saver�
(ON)
HDCR
(OFF)
■ HDCR default is OFF� Users can adjust HDCR in
any Mode�
■ HDCR enhances image quality by increasing the
contrast of images�
■ When HDCR is set to ON, Brightness will be
grayed out�
■ HDCR and Anti Motion Blur cannot be enabled
simultaneously�
■ When HDCR is enabled, Anti Motion Blur cannot
be enabled and Response Time cannot be set to
Fastest�
(ON)