MSI Optix MAG271C - Page 24

2-9
OSD Setup
2-8
Anti Motion Blur
(OFF)
■ Brightness cannot be adjusted when Anti Motion
Blur is set to ON�
■ When Response Time is set to Fastest with at least
75Hz Screen Refresh Rate, Anti Motion Blur will be
automatically enabled�
■ When Screen Refresh Rate is lower than 75HZ,
Anti Motion Blur cannot be enabled and Response
Time cannot be set to Fastest�
■ When Anti Motion Blur is enabled, HDCR cannot
be enabled and will be grayed out�
■ This function is recommended for cinema, FPS and
Racing games�
■ When FreeSync is enabled, Anti Motion Blur will be
grayed out�
(ON)
Image
Enhancement
OFF ■ Image Enhancement enhances image edges to
improve their acutance�
■ Users can adjust Image Enhancement in any
Mode�
Weak
Medium
Strong
Strongest
h Image
1st Level Menu 2nd/3rd Level Menu Description
Brightness 0-100 ■ Brightness default is 80�
■ Users can adjust Brightness in User, RTS,
RPG and Reader mode�
■ Brightness will be grayed out when Anti
Motion Blur and HDCR are enabled�
Contrast 0-100 ■ Contrast default is 80�
■ Users can adjust Contrast in any Mode�
Sharpness 0-5 ■ Sharpness default is 0� Users can adjust
Sharpness in any Mode�
■ Sharpness improves clarity and details of
images�
Color
Temperature
Cool ■ Color Temperature default is Normal�
■ Use Up or Down Button to select and
preview mode e󰘯ects.
■ Press the Middle Button to con󰘰rm and
apply your mode type�
■ Users can adjust Color Temperature in
Customization mode.
■ Customization mode default is 50/50/50.
Normal
Warm
Customization R (0-100)
G (0-100)
B (0-100)
Screen Size 4:3 ■ Screen Size default is 16:9.
■ Users can adjust Screen Size in any mode,
any resolution and any screen refresh rate�16:9