MSI Optix MAG341CQ - Troubleshooting Common Issues

1024×768 @75Hz V V V
1024×768 @100Hz V V V
1280×1024 @60Hz V V V
1280×1024 @75Hz V V V
1280×1024 @100Hz V V V
1440×900 @60Hz V V V
1440×900 @100Hz V V V
1680×1050 @60Hz V V V
1680×1050 @100Hz V V V
1920×1080 @60Hz V V V
1920×1080 @100Hz V V V
3440×1440 @60Hz V V V
3440×1440 @100Hz V V
Troubleshooting
The power LED is off.
■ Press the monitor power button again
■ Check if the monitor power cable is properly connected
No image.
■ Check if the computer graphics card is properly installed
■ Check if the computer and monitor are connected to electrical outlets and are turned on
■ Check if the monitor signal cable is properly connected
■ The computer may be in Standby mode Press any key to activate the monitor
The screen image is not properly sized or centered.
Refer to Preset Display Modes to set the computer to a setting suitable for the monitor to display
No Plug & Play.
■ Check if the monitor power cable is properly connected
■ Check if the monitor signal cable is properly connected
■ Check if the computer and graphics card are Plug & Play compatible
The icons, font or screen are fuzzy, blurry or have color problems.
■ Avoid using any video extension cables
■ Adjust brightness and contrast