2-6
1st Level Menu 2nd/3rd Level Menu Description
Anti Motion Blur
(OFF)
■ Brightness cannot be adjusted when Anti Motion
Blur is set to ON�
■ When Response Time is set to Fastest with at least
75Hz Screen Refresh Rate, Anti Motion Blur will be
automatically enabled�
■ When Screen Refresh Rate is lower than 75HZ,
Anti Motion Blur cannot be enabled and Response
Time cannot be set to Fastest�
■ When Anti Motion Blur is enabled, HDCR cannot
be enabled and will be grayed out�
■ This function is recommended for cinema, FPS and
Racing games�
■ When FreeSync is enabled, Anti Motion Blur will be
grayed out�
(ON)
Zero Latency
(OFF)
■ Zero Latency default is ON�
■ Zero Latency helps to reduce the signal throughput
timing and supports QHD only�
(ON)
Refresh Rate Location Left Top ■ Users can adjust Refresh Rate in any Mode�
■ Default Refresh Rate Location is Left Bottom�
Location is adjustable in OSD Menu� Press the
Middle Button to conrm and apply your Refresh
Rate Location�
■ This monitor follows and works at the Operating
System’s preset Screen Refresh Rate�
Right Top
Left Bottom
Right Bottom
OFF
ON
Alarm Clock Location Left Top ■ Users can adjust Alarm Clock in any Mode�
■ After setting the time, press the Middle Button to
activate the timer�
■ Default Alarm Clock Location is Left Top� Users
can select their own location�
Right Top
Left Bottom
Right Bottom
OFF
15:00 00:01~99:59
30:00
45:00
60:00
Screen
Assistance
None ■ Users can adjust Screen Assistance in any Mode�
■ Screen Assistance default is None�
FreeSync
(OFF)
■ FreeSync prevents screen tearing�
■ HDMI default is ON but grayed out (cannot be
changed)�
■ DisplayPort default is ON and can be adjusted ON/
OFF in any mode, any resolution, any input source
and any screen refresh rate�
■ When FreeSync is enabled, Anti Motion Blur will be
grayed out�
(ON)
To Next Page
Loading...
